Fine Art Wire Weaving: Weaving Techniques for Stunning Jewelry Designs by Sarah Thompson

Author:Sarah Thompson [Thompson, Sarah]
Language: eng
Format: epub
Publisher: F+W Media
Published: 2015-08-13T22:00:00+00:00

16. Place the woven form right-side up at the size 16 mark on the ring mandrel. Use your fingers to gently curve the woven form over the mandrel (Fig. 14).

Final Embellishments

17. Cut a 5" (12.5 cm) length of 26g wire. Wrap the center of the 26g wire around the balled end of the 14g wire, ending with the 26g wire tails on the back. Note: Steps 18 and 19 can be done after you have oxidized and polished the bracelet with some pre- oxidized 26g wire if you have concerns about dipping the pearls in the liver of sulfur.

18. Thread one 26g tail wire through the curved loop on one side of the woven form. String one pearl onto the wire and center it in the curved section. Wrap the 26g wire around the outside of the two woven 18g wires and back up around to wrap twice around the wire passing through the pearl. Repeat on the other side. Trim the excess 26g wire (Fig. 15).

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.